Rough-country 253X Manuel d'utilisateur télécharger pdf (Page 15)

OPTIONAL KICKER BAR INSTALLATION INSTRUCTIONS

1. Install kicker bracket bushing and sleeves in the kicker

bars.

2. Install the supplied kicker bar brackets on the rear cross-

member as shown in Photo 1 with the supplied 1/2” x 1

1/4” bolts, flat washers and lock nuts. Tighten using a 3/4”

socket & wrench.

3. Install the kicker bar in the mount on the cross-member

with the supplied 1/2” x 3 1/2” bolts, flat washers and lock

nuts. See Photo 2. Do not tighten at this time.

4. Swing up the kicker bars and mark the hole to be drilled.

5. Drill the hole in the cross-member using a 1/2” drill bit.

6. Secure the bracket to the cross-member 1/2” x 1” bolts, flat

washers and lock nuts.

7. Swing up the kicker bar and secure to the cross-member

using the supplied 1/2” x 3 1/2” bolts, flat washers and lock nuts. See Photo 3.

Photo 2

Photo 3

Photo 1

INSTALL KICKER BRACKETS

INSTALL KICKERS INSTALL BRACKETS ON CROSS-MEMBER

1 2 ... 10 11 12 13 14 15 16 17 18 19 20

Pas de commentaire

Rough-country 253X Manuel d'utilisateur Page 15