Rough-country 253X Manuel d'utilisateur télécharger pdf (Page 5)

14. Remove the ABS wire from the bracket as shown in Photo 7 and from disconnect at the frame as in Photo 8.

15. Remove brake caliper from the rotor using a 21mm socket / wrench. Retain the factory hardware. See Photo 9.

16. Remove sway-bar link hardware as shown in Photo 10 using a 15mm socket/ wrench. Retain the factory hardware.

17. Remove dust cap using a flat head screwdriver to access the axle nut.

18. Remove axle nut using a 33mm socket. Retain the factory hardware. See Photo 11.

19. Loosen but do not remove the upper ball-joint nut using a 18mm socket/ wrench. Strike the knuckle to release the

ball joint and remove the nut. Retain the factory hardware. See Photo 12.

Photo 7 Photo 8

Photo 9 Photo 10

Photo 11 Photo 12

REMOVE THE ABS WIRE UNPLUG THE ABS WIRE

REMOVE THE BRAKE CALIPER REMOVE THE SWAY BAR LINK

REMOVE THE AXLE NUT

REMOVE THE FRONT SHOCKS

1 2 3 4 5 6 7 8 9 10 ... 19 20

Pas de commentaire

Rough-country 253X Manuel d'utilisateur Page 5