Rough-country 727 Manuel d'utilisateur télécharger pdf

S-10 SPINDLE LOWERING KIT 2” FRONT & 2.5” REAR

Thank you for choosing Rough Country for all your suspension needs.

Rough Country recommends a certified technician install this system. In addition to these instructions, professional

knowledge of disassemble/reassembly procedures as well as post installation checks must be known. Attempts to install

this system without this knowledge and expertise may jeopardize the integrity and/or operating safety of the vehicle.

Please read instructions before beginning installation. Check the kit hardware against the kit contents list on the back

page. Be sure you have all needed parts and know where they go. Also please review tools needed list and make sure

you have the tools needed to install the kit.

PRODUCT USE INFORMATION

Generally, braking performance and capability are decreased when larger/heavier tires and wheels are used. Take this

into consideration while driving. Do not add, alter, or fabricate any factory or after-market parts to decrease vehicle

height over the intended height of the Rough Country product purchased. Mixing component brands is not recom-

mended.

Rough Country makes no claims regarding lowering devices and excludes any and all implied claims. We will not be re-

sponsible for any product that is altered.

We will be happy to answer any questions concerning the design, function, and use of our products.

NOTICE TO DEALER AND VEHICLE OWNER

INSTALLING DEALER / OWNER - It is your responsibility to install the warning decal and forward these installation in-

structions on to the vehicle owner for review. These instructions should be kept in the vehicle for its service life.

92724000

Tools Needed:

11mm Wrench

13mm Wrench

18mm Wrench

21mm Wrench

3/4” Socket

7/8” Wrench

15/16” Wrench

3/8”mm Allen

Wrench

Channel Locks

Needle Nose Pliers

Floor Jack

Jack Stands

1 2 3 4

Rear Installation 4
Post Instructions 4

Résumé du contenu

Page 1

S-10 SPINDLE LOWERING KIT 2” FRONT & 2.5” REAR Thank you for choosing Rough Country for all your suspension needs. Rough Country recommends a ce

Page 2

FRONT INSTALLATION INSTRUCTIONS 1. Lift the front of the vehicle using a jack and support the vehicle with jack stands, so that the front wheels are

Page 3

9. Remove the upper ball joint cotter pin and then loosen the upper ball joint nut using a 15/16” wrench as shown in Photo 7. Do not remove nut. 10.

Page 4 - Post Instructions

Rear Installation 1. Jack the rear of the truck up and place the frame on jack stands. 2. Remove the rear tires and wheels with a 3/4” deep well so

Commentaires sur ces manuels

Pas de commentaire

Rough-country 727 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Pour la voiture Rough-country 727. Rough Country 727 User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Pour la voiture Rough-country 727