Rough-country 745N2 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Pour la voiture Rough-country 745N2. Rough Country 745N2 User Manual Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 4
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
Thank you for choosing Rough Country for your suspension needs.
Rough Country recommends a certified technician install this system. In addition to these instructions, professional
knowledge of disassembly/reassembly procedures as well as post installation checks must be known. Attempts to install
this system without this knowledge and expertise may jeopardize the integrity and/or operating safety of the vehicle.
Please read instructions before beginning installation. Check the kit hardware against the parts list on this page and the
product layout on the last page. Be sure you have all needed parts and know where they go. Also please review tools
needed list and make sure you have needed tools.
PRODUCT USE INFORMATION
As a general rule, the taller a vehicle is, the easier it will roll. Seat belts and shoulder harnesses should be worn at all
times. Avoid situations where a side rollover may occur.
Generally, braking performance and capability are decreased when larger/heavier tires and wheels are used. Take this
into consideration while driving. Do not add, alter, or fabricate any factory or after-market parts to increase vehicle height
over the intended height of the Rough Country product purchased. Mixing component brands is not recommended.
Rough Country makes no claims regarding lifting devices and excludes any and all implied claims. We will not be re-
sponsible for any product that is altered.
If questions exist we will be happy to answer any questions concerning the design, function, and correct use of our prod-
ucts.
This suspension system was developed using a Maximum tire size of 265/75R-17with factory wheels. For aftermarket
wheel and tire combinations consult your tire and wheel specialist.
NOTICE TO DEALER AND VEHICLE OWNER
Any vehicle equipped with any Rough Country product should have a “Warning to Driver” decal installed on the inside of
the windshield or on the vehicle’s dash. The decal should act as a constant reminder for whoever is operating the vehi-
cle of its unique handling characteristics.
INSTALLING DEALER - it is your responsibility to install the warning decal and forward these installation instructions on
to the vehicle owner for review. These instructions should be kept in the vehicle for its service
92745000
Tools Needed:
12 mm Wrench
14 mm Socket
17 mm Socket
17 mm Wrench
19 mm Socket
19 mm Wrench
Hammer
16mm Wrench
21mm Socket
Kit Contents:
2-Front Strut Extensions
2-2” Rear Blocks
2-Rear Shock Absorbers
4-Rear U-bolts
1-Kit Bag including:
6-3/8” studs
6-3/8” nuts
6-3/8” lock washers
1-Kit Bag including:
2-Shock sleeves
4-Shock stem bushings
4-Cup washers
2-3/8” nuts
1—Kit Bag Including
8—U-Bolts Nuts
8—U-Bolt Washers
05-11 TACOMA 3” Fr / 2” Rr Leveling Kit
Torque Specs:
Size Grade 5 Grade 8
5/16” 15 ft/lbs 20 ft/lbs
3/8” 30 ft/lbs 35 ft/lbs
7/16” 45 ft/lbs 60 ft/lbs
1/2” 65 ft/lbs 90 ft/lbs
9/16” 95 ft/lbs 130 ft/lbs
5/8” 135 ft/lbs 175 ft/lbs
3/4” 185 ft/lbs 280 ft/lbs
Class 8.8 Class 10.9
6MM 5 ft/lbs 9 ft/lbs
8MM 18ft/lbs 23 ft/lbs
10MM 32ft/lbs 45ft/lbs
12MM 55ft/lbs 75ft/lbs
14MM 85ft/lbs 120ft/lbs
16MM 130ft/lbs 165ft/lbs
18MM 170ft/lbs 240ft/lbs
Vue de la page 0
1 2 3 4

Résumé du contenu

Page 1

Thank you for choosing Rough Country for your suspension needs. Rough Country recommends a certified technician install this system. In addition t

Page 2

FRONT INSTALLATION 1. Jack up the front of the vehicle and support the vehicle with jack stands, so that the front wheels are off the ground 2. R

Page 3

9. Install the new spacer with the studs pressed in on the strut assembly and install the spacer on the strut assembly with the stock hardware. See P

Page 4 - MAINTENANCE INFORMATION

POST INSTALLATION 1. Check and recheck all fasteners for proper torque. Check to ensure there is adequate clearance between all rotat-ing, mobile,

Commentaires sur ces manuels

Pas de commentaire