Rough-country 395 Manuel d'utilisateur télécharger pdf

06 & Up Dodge 4WD 1500 2.5” Suspension Kit

Thank you for choosing Rough Country for all your suspension needs.

Rough Country recommends a certified technician install this system. In addition to these instructions, professional

knowledge of disassemble/reassembly procedures as well as post installation checks must be known.

Please read instructions before beginning installation. Check the kit hardware against the kit contents list on the back

page. Be sure you have all needed parts and know where they go. Also please review tools needed list and make sure

you have needed tools.

PRIOR TO INSTALLTION NOTE:

Under hard acceleration in 4x4 high, stock Dodge Ram’s often have a front end vibration or shutter. This vibra-

tion or shutter exist due to the design of the motor and differential mounts and is inherent in the vehicle. This

vibration or shutter may be more pronounced after a leveling kit is installed due to additional torque from modi-

fied driveshaft angles. This does not indicate a problem, but should be a consideration prior to installation

PRODUCT USE INFORMATION

As a general rule, the taller a vehicle is, the easier it will roll. Seat belts and shoulder harnesses should be worn at all

times. Avoid situations where a side rollover may occur.

Generally, braking performance and capability are decreased when larger/heavier tires and wheels are used. Do not

add, alter, or fabricate any factory or after-market parts to increase vehicle height over the intended height of the Rough

Country product purchased.

Rough Country makes no claims regarding lifting devices and excludes any and all implied

claims. We will not be responsible for any product that is altered. If question exist we will be happy to answer any ques-

tions concerning the design, function, and use of our products.

This suspension system was developed using a 33X12.50/17, tire with factory wheels.

NOTICE TO DEALER AND VEHICLE OWNER

Any vehicle equipped with any Rough Country product should have a “Warning to Driver” decal installed on the inside of

the windshield or on the vehicle’s dash. And should act as a constant reminder of its unique handling characteristics.

INSTALLING DEALER - it is your responsibility to install the warning decal and forward these installation instructions on

to the vehicle owner for review. These instructions should be kept in the vehicle for its service life.

92395000

INSTALLATION INSTRUCTIONS

1. Jack up the front of the vehicle and support the vehicle with jack stands, so that the front wheels are off the ground.

2. Using 22mm socket remove the front tires/wheels.

3. Using 21mm socket remove the nut from the steering linkage. Using a hammer hit on the side of the knuckle as

shown, and remove the linkage from the knuckle. Push linkage forward to make room for installation. Retain factory

hardware See PHOTO 1.

4. Using a 15mm wrench, remove the sway bar nut, and bushings allowing the sway bar to drop. Retain factory hard-

ware. See PHOTO 2.

PHOTO 2 PHOTO 1

1 2 3 4

Résumé du contenu

Page 1

06 & Up Dodge 4WD 1500 2.5” Suspension Kit Thank you for choosing Rough Country for all your suspension needs. Rough Country recommends a certi

Page 2

5. Using a 15mm Socket, remove the strut nuts on the upper strut tower. See PHOTO 3 6. Place jack stand under the knuckle for support. Using 21 mm

Page 3

REAR INSTALLATION (IF PURCHASED WITH KIT) 1. Jack up the rear of the vehicle and place jack stands underneath the frame rail. 2. Remove the tires

Page 4

KIT CONTENTS 2-Front Strut Extensions 1-Kit Bag that includes 6-3/8” Studs 6-3/8” nuts 6-3/8 lock washers 395S 650396 Shock (2)

Commentaires sur ces manuels

Pas de commentaire

Rough-country 395 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Pour la voiture Rough-country 395. Rough Country 395 User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Pour la voiture Rough-country 395